Metal Coating B (8 Oz)
Sculpt Nouveau Metal Coatings B is made from ground metal suspended in a non-toxic water based acrylic binder. Metal Coating B may be applied by any technique (air brush, sponge, brush, etc.) to both metal and non-metal surfaces such as glass, wood, ceramics, plaster, concrete, foam, and resin.
Metal Coating B is available in Brass, Bronze, Copper, Iron, Pewter, and Silver
All of the Sculpt Nouveau Dye-Oxide Patinas, Universal Patinas, Vista Patinas, Solvent Dyes, Patina Stains, and Finishing Waxes work well with the Metal Coatings allowing endless possibilities for finishes. Among the Traditional Patinas, Liver of Sulfur (brown) and Tiffany (green) patinas work the best with the Metal Coatings.
Sculpt Nouveau Metal Coatings are very durable outside (10 to 15 years) and are non-hazardous. One Gallon of Metal Coating will cover 100 square feet (this includes the recommended two layers).
Sculpt Nouveau Patinas may be applied to Metal Coating B whether wet or dry. Once dry, Sculpt Nouveau Metal Coating B may be burnished with steel wool in order to highlight or adjust the patina. Additionally, more patina may be added after burnishing. However, Metal Coating B is not self-sealing. A clear coat should be added to protect the patina
When applying the Metal Coatings to ferrous metals (iron, steel, and aluminum), a primer must be used to protect the underlying metal.
Just prime your piece properly (we suggest using Prime-It, and this metal coating will change your material into the metal you have chosen. Don't accept imitations. This has more metal powder per ounce than all the rest, and it is ready to use with a full line of Sculpt Nouveau patinas and finishing waxes for beautiful results.
